yesterday，The General Office of the Ministry of Transport, the General Office of the Ministry of Public Security, and the General Office of the State Administration for Market Regulation issued a notice on further implementing the reform policy of road freight vehicle inspection and testing。Clarify before October 15, 2018，Security checks are available、The inspection and testing institutions with the qualification conditions of "two inspections in one" for comprehensive inspection (i.e., the same enterprise legal person，There is also a security check、Comprehensive inspection of two qualifications) must fully realize the "one-time online."、One test、One-time charge"。 The General Office of the Ministry of Transport, the General Office of the Ministry of Public Security, and the General Office of the State Administration for Market Regulation Notice on Further Implementing the Reform Policy on Road Freight Vehicle Inspection and Testing Provinces、Autonomous regions、city、Xinjiang Production and Construction Corps Department of Transportation (Bureau、Committee)，Public Security Department (Bureau)，Bureau of Quality and Technical Supervision (Market Supervision and Administration Department)： In accordance with the deployment requirements of the State Council on promoting logistics cost reduction and efficiency improvement and promoting the development of the real economy，Ministry of Transport、Public security、The General Administration of Quality Supervision, Inspection and Quarantine jointly issued the "Notice on Accelerating the Reform of Road Freight Vehicle Inspection and Testing" (Jiao Yun Fa [2017] No. 207)，Deploy and carry out the annual inspection (safety technical inspection) and annual review (comprehensive performance inspection) of road freight vehicles in accordance with the law。presently，The implementation of the reform policy of annual inspection and annual examination of freight vehicles (hereinafter referred to as the "two inspections in one" policy) has achieved initial results，However, there are still some areas that have been slow to implement reform policies、Implementation is not in place，Some freight vehicle inspection and testing institutions are not active in implementing policies、not thoroughly, etc。In order to ensure that the "two inspections in one" policy is implemented to the letter，By the Ministry of Transport、Public security、The State Administration for Market Regulation agreed，The relevant matters are hereby notified as follows： One、Promote the "two-in-one" inspection and testing institutions to achieve "one online" within a limited time、One test、One-time charge" to accelerate the reform of "two inspections in one" for road freight vehicles，2018Before October 15 of the year，Security checks are available、The inspection and testing institutions with the qualification conditions of "two inspections in one" for comprehensive inspection (i.e., the same enterprise legal person，There is also a security check、Comprehensive inspection of two qualifications) must fully realize the "one-time online."、One test、One-time charge"。Provincial Transportation、public security、The competent department of quality supervision should further improve the implementation of measures，Identify the responsible departments、Responsible personnel and work standards，Swift launch of joint operations，Implement it on a site-by-place basis，Ensure that the goal of "two inspections in one" is achieved as scheduled。 Two、Publish the list of "two inspections in one" inspection and testing institutions for freight vehicles before October 10, 2018，Provincial Transportation、public security、The competent department of quality supervision shall pass the website of the government department、WeChat public account、News and newspapers and other channels to announce to the public that the province has security checks、List of freight vehicle inspection and testing institutions with comprehensive inspection "two inspections in one" qualification、Contact number and business address，It provides convenience for the majority of car owners to inspect the car nearby。It is necessary to intensify social propaganda，Clarify policy requirements，Actively guide the majority of truck owners to choose the "two inspections in one" inspection and testing institutions for inspection and testing，It is easy to achieve "one time online."、One test、One-time charge"，Reduce the waiting time for inspection and testing，Effectively reduce the burden of management。 Three、Sign the commitment letter of commitment for the implementation of the "two inspections in one" reform policy before October 10, 2018，Transportation at the municipal and municipal levels、public security、The quality supervision department jointly signed the "Letter of Commitment to Implement the Reform Policy of "Two Inspections in One" for Road Freight Vehicles with the freight vehicle inspection and testing institutions within its jurisdiction station by station (see the annex for the sample)。For those with security checks、Comprehensive inspection of "two inspections in one" qualification of inspection and testing institutions，It is necessary to promise to carry out one-stop inspection and testing services，Optimize the internal process of inspection and testing，Realize the car owner inspection "queue once."、Last line、Pay a one-time fee"，No double charges are allowed。2018Before October 15 of the year，Local and municipal transportation、public security、The quality supervision department shall report the signing of the letter of commitment of the inspection and testing institutions in the region to the three provincial departments and bureaus，Ensure full coverage of inspection and testing institutions in the province。 For truck inspection and testing institutions that fail to implement the reform commitments as scheduled and do not implement the reform policy，Transportation at the municipal and municipal levels、public security、The quality supervision department should have a joint interview，Supervise rectification；refusal to make corrections，The quality supervision department suspends its inspection and testing qualifications，public security、The transportation department suspended the acceptance of its inspection and testing reports。 Four、Fully implement the "turnkey project" of truck owners in all provincial transportation、public security、The competent department of quality supervision should take prompt action，2018Before October 15 of the year，There is a security check at the same time、The inspection and testing agency with the qualification of "two inspections in one" for comprehensive inspection fully implements the "turnkey project" of car owners，Optimize the truck inspection and testing service process，Fully realize "one go-live."、One test、One-time charge"。 The specific requirements for the implementation of the "turnkey project" of the inspection and testing agency are:：After the owner goes to the "two-in-one" inspection and testing institution，Queue up only once、Pay only once，Security screening of all trucks、The comprehensive inspection and testing matters shall be completed by the staff of the inspection and testing agency at one time (the vehicle can be in different workshops、Conversion between inspection and testing facilities and equipment，Unified responsibility of the staff)，At the same time, we obtain a security check、Two inspection and testing reports for comprehensive inspection，Duplicate charges shall not be made for the same test item。 Five、Increase the supervision and assessment of the implementation of the inspection and testing reform policy in various parts of the country、public security、The quality supervision department should urge the inspection and testing institutions to disclose the inspection and testing items、Fees:，and sign the pledge，In the office hall、Hang signs in waiting areas and other places、Set up the display board，Advocacy of reform policies，Publicize the combined inspection and testing items，Take the initiative to be supervised。 Provincial Transportation、public security、The competent department of quality supervision shall jointly organize and carry out inspections and covert visits to the implementation of reform policies，Establish a "two-in-one" policy to implement a reporting system。Received policy is not implemented、Misrepresentation of policies、Clues such as reporting crimes against the wind，Investigate quickly、Deal with it seriously、Public exposure，Ensure that reform policies are truly implemented、No rebound。Ministry of Transport、Public security、The General Administration of Quality Supervision and Supervision will supervise and inspect the implementation of local policies as appropriate，For provinces that do not work well，The three ministries will organize joint interviews，and notify the local provincial people's government。 Six、Strictly regulate the management of inspection and testing institutions for security inspections that have obtained qualification certificates、Comprehensive inspection agency，All those who meet the relevant technical standards，Local public security concerns、The transport sector should be connected to it in a timely manner；Management departments at all levels shall not restrict inspection and testing institutions from networking with them for any reason。2018Before December 31 of the year，Ensure that more than 15 provinces realize the intra-provincial comprehensive inspection network and off-site annual review。2019Before the end of December，Fully realize the national networking and general inspection of freight vehicles。 It is forbidden to designate or indirectly designate freight vehicle inspection and testing institutions。Provincial transportation、public security、The competent department of quality supervision shall make public the supervision telephone，Designated inspection and testing institutions were found、undermining the order of fair competition in the market，All will be dealt with seriously and publicly reported；For personnel of relevant departments who violate integrity and discipline、Abuse、interfere with the market，Pursue the responsibility of relevant personnel in accordance with laws and regulations。 Provincial transportation、public security、The competent department of quality supervision should earnestly improve its political position，Strengthen responsibility，Form a joint force of departments，Pay close attention to the implementation of policies。It should be required in accordance with the prescribed time limit，Identify the responsible departments，Formulate a detailed implementation plan，Earnestly deploy and implement，Ensure that the implementation of the "two inspections in one" policy is completed on time with quality and quantity。2019Before the end of June，Provincial transportation、public security、The competent department of quality supervision shall report the progress of the reform to the Ministry of Transport before the end of each month、Public security、State Administration for Market Regulation。 General Office of the Ministry of Transport, General Office of the Ministry of Public Security, General Office of the State Administration for Market Regulation, September 30, 2018 ...

Decision of the State Council on Further Reducing the Management Catalogue of Industrial Product Production Licenses and Simplifying the Approval Procedures Guo Fa [2018] No. 33 of all provinces、Autonomous regions、The people's governments of municipalities directly under the Central，Ministries and commissions of the State Council、Directly subordinate agencies： It has been researched and demonstrated，The State Department decided，Further reduction of the catalogue for the management of industrial product production licenses (hereinafter referred to as the catalogue)，Cancel the management of production licenses for 14 types of industrial products，Delegate the authority to the quality and technical supervision department of the provincial people's government (market supervision and management department) for the production license of four types of industrial products。After the adjustment, a total of 24 categories of products will continue to be subject to the management of industrial product production licenses，thereinto，7 categories implemented by the State Administration for Market Regulation，17 categories implemented by the quality and technical supervision department of the provincial people's government (market supervision and management department).。 Simplified approval procedures for products in the catalog。The first is to change the pre-certification product inspection organized by the issuing authority to the product inspection report issued by the qualified inspection and testing agency submitted by the enterprise when applying。Second, in addition to hazardous chemicals,The quality and technical supervision department of the provincial people's government (market supervision and management department) implements a post-on-site review of the licensed products，After the enterprise submits the application and product inspection report and makes a commitment to ensure product quality and safety，After passing the formal examination, you can get the production license，After that, the on-site audit will be conducted within the specified time。The third is the different categories of products in the production and operation catalogue of the enterprise，In accordance with the principle of "one enterprise, one certificate".，When applying for a new permit or applying for a renewal of a permit，A license is issued at the same time。 Regions、All relevant departments should solidly promote the work of reducing the catalogue and simplifying the approval procedures。It is necessary to increase the publicity of enterprise commitments and post-on-site review，Strengthen credit oversight and restraint measures，Implement the main responsibility of enterprise quality，to false promises、Does not meet the requirements，The production license will be revoked。For products that have been subject to the cancellation of the management of industrial product production licenses，It is necessary to earnestly strengthen supervision during and after the event，Public health and safety are involved、Environmental protection and other products can be converted into compulsory certification，Make a positive list and publicize it to the public，Unified certification standards、Reasonably reduce and merge certification testing items，In principle, the cost of compulsory certification shall be borne by all levels of finance according to the system。Take supportive measures，Encourage enterprises to carry out voluntary certification，Promote branding、Expand your market。It is necessary to benchmark against international advanced standards，Promote the improvement of industrial product quality。Give full play to the role of third-party social organizations，Ensure the quality and safety of industrial products。For products that retain the management of industrial product production licenses，It is necessary to improve the standard system，Give full play to the advantages of industry supervision，Strengthen "who approves."、Who regulates the "responsibility."，Dynamically assess product quality and safety risks，Cut down the catalogue at the right time、Delegate approval authority or transfer to certification management。   State Council September 23, 2018 (This document is publicly released) Annex 1 The industrial product production license is cancelled、Product Catalog with Decentralized Management Authority (18 categories in total) Serial Number Product Name Current Implementation Organ Adjustment 1 Hydraulic metal structures were cancelled by the State Administration for Market Regulation 2 Port handling machinery is cancelled by the State Administration for Market Regulation 3 Integrated circuit cards and integrated circuit card readers and the State Administration for Market Regulation have cancelled 4 Refrigeration equipment is cancelled by the State Administration for Market Regulation 5 Air compressor cancelled by the State Administration for Market Regulation 6 Gas appliances are cancelled by the State Administration for Market Regulation 7 Explosion-proof electrical cancelled by the State Administration for Market Regulation 8 Broadcasting and communication towers and masts are cancelled by the State Administration for Market Regulation ...

QX/T 430-2018 Fireworks and firecrackers production enterprises lightning protection technical specifications QX/T 431-2017 Lightning Protection Technical Document Classification and Coding QX/T 428-2018 Rainstorm-induced disaster risk survey specification Flood of small and medium-sized rivers QX/T 425-2018 Safety specification for tethered balloon release JGJ/T 429-2018 Safety Standard for Accident-prone Prevention and Control of Building Construction JGJ/T 414-2018 CJJ/T for Building Construction Formwork and Scaffolding Test Standards 281-2018 Technical standard DL/T for bridge cantilever pouring construction 5546-2018 Design Guidelines for Anti-Corrosion of Natural Draft Cooling Towers JGJ/T 150-2018 Quality Acceptance Standard for Window Cleaning Machine Installation Project JGJ/T 427-2018 Technical Standard for the Protection of Finished Products of Building Decoration and Decoration Engineering JGJ 450-2018 Architectural Design Standard for Elderly Care Facilities JGJ/T 422-2018 Technical standard for the inspection of existing building foundation GB/T 35995-2018 Carbon monoxide GB/T 36039-2018 Gas-fired power station natural gas system safety production management code CJ/T 394-2018 Solenoid Gas Emergency Shut-off Valve GB/T 36044-2018 Specification for the Identification of Safety-Important Electrical Equipment in Nuclear Power Plants DL/T ...