Author: CCATS

Chapter I General Provisions Article 1 The procedures and standards for the completion and acceptance of environmental protection facilities in construction projects are standardized，Strengthen the main responsibility of construction units for environmental protection，According to the Regulations on the Management of Environmental Protection of Construction Projects，These measures are formulated。 Article 2 These measures apply to the preparation of environmental impact reports (forms) and in accordance with the provisions of environmental protection laws and regulations, by the construction unit to implement the completion and acceptance of environmental protection facilities of construction projects and related supervision and management。 Article 3 The main basis for environmental protection acceptance of the completion of construction projects includes:： (1) Laws related to environmental protection of construction projects、statute、regulations、Standards and normative documents； (2) Technical specifications for environmental protection acceptance of construction projects； (3) The environmental impact report (form) of the construction project and the approval decision of the examination and approval department。 Article 4 The construction unit is the main body responsible for the environmental protection acceptance of the completion of the construction project，shall be in accordance with the procedures and standards set forth in these measures，Organize the acceptance of environmental protection facilities for supporting construction，Preparation of acceptance report，Disclose relevant information，Accept social supervision，Ensure that the environmental protection facilities that need to be built in the construction project are put into operation or used at the same time as the main project，and the acceptance of the content、Conclusions and veracity of the information disclosed、Accuracy and completeness are responsible，There shall be no fraud in the acceptance process。 Environmental protection facilities refer to the devices required to prevent and control environmental pollution and ecological damage and to carry out environmental monitoring、equipment and engineering facilities, etc。 The acceptance report is divided into an acceptance monitoring (investigation) report、Acceptance opinions and other matters that need to be explained。 Chapter II Procedures and Content of Acceptance Article 5 After the completion of the construction project，The construction unit shall be truthfully inspected、monitoring、Record the construction and commissioning of environmental protection facilities of construction projects，Preparation of acceptance monitoring (investigation) report。 Construction projects that mainly emit pollutants，Prepare the acceptance monitoring report with reference to the "Technical Guide for Environmental Protection Acceptance of Construction Project Completion" and Pollution Impact；Construction projects that have a major impact on the ecology，Prepare the acceptance investigation report in accordance with the "Technical Specifications for Environmental Protection Acceptance of Construction Projects Completion Ecological Impact Category".；Thermal power generation、Petroleum refining、Water conservancy and hydropower、Nuclear and radiation and other construction projects that have issued technical specifications for industry acceptance，Prepare acceptance monitoring reports or acceptance investigation reports in accordance with the acceptance technical specifications of the industry。 The construction unit does not have the ability to prepare the acceptance monitoring (investigation) report，It can be commissioned to a competent technical institution。The construction unit shall be responsible for the conclusion of the acceptance monitoring (investigation) report prepared by the entrusted technical institution。The relationship of rights and obligations between the construction unit and the entrusted technical institution，and the responsibilities of the entrusted technical institutions，It can be agreed in the form of a contract。 Article 6 It is necessary to debug the environmental protection facilities supporting the construction of the construction project，The construction unit shall ensure that the pollutant discharge during the commissioning period complies with the relevant national and local pollution discharge standards and relevant management regulations such as pollutant discharge permits。 Environmental protection facilities are not built at the same time as the main project，or should have obtained a pollutant discharge permit but did not do so，The construction unit shall not debug the environmental protection facilities of the construction project。 During commissioning，The construction unit shall monitor the operation of environmental protection facilities and the impact of construction projects on the environment。Acceptance monitoring shall ensure the stability of the commissioning conditions of the main project、It is carried out under the condition that the environmental protection facilities are in normal operation，And truthfully record the actual working conditions during monitoring。The relevant national and local pollutant discharge standards or industry acceptance technical specifications have other provisions on working conditions and production loads，It shall be implemented in accordance with its provisions。The construction unit carries out acceptance monitoring activities，According to their own conditions and abilities，Make use of your own personnel、Premises and equipment are monitored on their own；Monitoring could also be entrusted to other competent monitoring bodies。 Article 7 After the preparation of the acceptance monitoring (investigation) report is completed，The construction unit shall be based on the conclusion of the acceptance monitoring (investigation) report，Check one by one whether there is any unqualified acceptance listed in Article 8 of these measures，Put forward acceptance opinions。There is a problem，The construction unit shall carry out rectification，After the rectification is completed, the acceptance opinions can be put forward。 The acceptance opinions include the basic situation of the project construction、Changes in the project、Implementation of environmental protection facilities、Commissioning effect of environmental protection facilities、The impact of engineering construction on the environment、Acceptance conclusions and follow-up requirements，The acceptance conclusion shall clarify whether the environmental protection facilities of the construction project are qualified for acceptance。 After the experience of environmental protection facilities supporting the construction of the construction project is qualified，The main project can be put into production or use；It has not been accepted or the acceptance is unqualified，It shall not be put into production or use。 Article 8: Environmental protection facilities of construction projects have any of the following circumstances，The construction unit shall not put forward the opinion of passing the acceptance： (1) Failure to build environmental protection facilities in accordance with the requirements of the environmental impact report (form) and the approval decision of the examination and approval department，or the environmental protection facilities cannot be put into operation or used at the same time as the main project； (2) The discharge of pollutants does not comply with relevant national and local standards、The environmental impact report (form) and the approval decision of its examination and approval department or the total discharge control index of key pollutants are required； (3) After the environmental impact report (form) is approved，The nature of the construction project、scale、place、The production process used or the prevention and control of pollution、There has been a major change in measures to prevent ecological damage，The construction unit has not re-submitted the environmental impact report (form) for approval or the environmental impact report (form) has not been approved； (4) Major environmental pollution caused during the construction process has not been completed，or causing major ecological damage that has not been restored； (5) Construction projects included in the management of pollutant discharge permits，Discharging pollutants without a permit or discharging pollutants without a permit； (6) Phased construction、Construction projects that are put into production or used in phases and shall be accepted in phases in accordance with law，Its phased construction、The ability of environmental protection facilities put into production or use in phases to prevent and control environmental pollution and ecological damage cannot meet the needs of the corresponding main project； (7) The construction unit is punished for violating national and local environmental protection laws and regulations for the construction project，Ordered to make corrections，The correction has not been completed； (8) The basic data of the acceptance report are obviously untrue，There are significant deficiencies in the content、omit，Or the acceptance conclusion is not clear、irrational； (9) Other environmental protection laws, regulations, rules, and other provisions must not pass environmental protection acceptance。 Article 9 In order to improve the effectiveness of acceptance，In the process of putting forward acceptance opinions，The construction unit may organize the establishment of an acceptance working group，Take an on-site inspection、Access to information、Convening acceptance meetings, etc，Assist in carrying out acceptance work。Acceptance of the working group can be made up of design units、Construction unit、The organization that prepares the environmental impact report (form).、Acceptance, monitoring (investigation) report preparation agency and other unit representatives, as well as professional and technical experts，The scope and number of delegates are self-determined。 Article 10 The construction unit shall truthfully record the design of environmental protection facilities in the "other matters that need to be explained".、A brief overview of the construction and acceptance process、The implementation of environmental protection countermeasures other than environmental protection facilities proposed in the environmental impact report (form) and the approval decision of the examination and approval department，and the rectification work。 The relevant local government or government department promises to be responsible for the relocation of residents within the protective distance supporting the construction of the project、Functional replacement、Habitat protection and other environmental protection countermeasures，The construction unit shall actively cooperate with the local government or department to complete the project within the promised time limit，and truthfully record the implementation of the aforesaid environmental protection countermeasures in "other matters that need to be explained".。 Read More …

One、The label information should be complete，"9+" elements are indispensable in accordance with the requirements of the "National Food Safety Standard General Principles for the Labeling of Prepackaged Food" (GB 7718-2011).，Labelling of pre-packaged food products provided directly to consumers should include::Name of the food、Ingredient list、Net content and specifications、Name of the producer and/or distributor、Address and contact details、Date of manufacture and shelf life、Storage conditions、Food production license number、9 major items such as product standard code，and other content that needs to be labeled。in the supermarket、Mooncakes sold in formal food sales places or channels such as shops，Its label should contain the above information。Do not buy or eat unlabeled or incomplete label information、The content is not clear，conceal、Reprinted or tampered with labelled products。   In addition to the food labels mentioned earlier，Some mooncakes also provide food nutrition labels。Nutrition labelling mainly includes:："Nutrition Facts List" in tabular form，and "nutrition claims" that explain the level of nutrients and "nutrition function claims" that explain health effects。thereinto，The nutrition facts list should indicate at least 5 elements (energy、protein、fat、carbohydrates、sodium) and its daily nutrient reference value (NRV)。Consumers can choose to consume it according to the nutrient reference value and their own physical condition。furthermore，The energy in most mooncakes、Higher in fat and carbohydrates，Do not consume in excess，Otherwise, it is easy to cause gastrointestinal discomfort，Especially the elderly、child、People with weak gastrointestinal function。   Two、The order of ingredients is exquisite，Allergy information should not be missed Mooncakes are made from wheat flour and other grain flour or vegetable flour、oil、Sugar (or no added sugar) is the main ingredient to make a pie crust，Wrap with a variety of fillings，Machined。Due to the wide variety of mooncakes，The types of ingredients used to make the crust and filling vary。   In accordance with the requirements of relevant national standards，All food additives used in food must be stated in the ingredient list，and in the amount added when manufacturing or processing food，Sort them one by one from highest to lowest，Ingredients with a volume of no more than 2% can be added in descending order。Food sold through regular channels，The types and amounts of food additives are added in strict accordance with national standards。   furthermore，If the ingredients contain foods and products that may cause allergic reactions，Such as cereals containing gluten and their products、peanuts and their products, etc，Manufacturers may (but are not required) use a recognizable name in the ingredient list，Or indicate it in the vicinity of the ingredient list。People who are susceptible to allergies should pay attention to carefully check the ingredient list when choosing or eating mooncakes，and whether there is a prompt in the vicinity of the ingredient list。   Three、The production date should be carefully examined，The expiration date should be paid attention to the mooncakes sold through regular channels，The date of manufacture and the expiration date are clearly marked on the packaging。When shopping for mooncakes，Do not buy products that have passed their expiration date，Also pay attention to the labels on gift boxes and individual food packages。National regulations，When the same pre-package contains multiple single pieces of pre-packaged food with the date of manufacture and expiration date，For example, a mooncake gift box contains multiple flavors of mooncakes or other food items at the same time，The date of manufacture indicated on the outer packaging shall be the date of manufacture of the earliest single piece of food，or the date on which the outer packaging forms the unit of sale，Moreover, the shelf life indicated on the outer packaging should be calculated according to the shelf life of the individual food that expires at the earliest；The production date and shelf life of each single piece of food can also be marked on the outer packaging。   Four、Storage conditions are indispensable，Properly preserved and of good quality in accordance with regulatory requirements，The storage conditions should be indicated on the label of prepackaged food，Storage conditions are indicated in the form of:：Room temperature (or frozen，or refrigerated，or protect from light，or in a cool, dry place).；×× – Store at ×× °C；Store in a cool, dry place；Store at room temperature，Refrigerate after opening；temperature：≤××℃，humidity：≤××%, etc。Keep mooncakes according to the storage conditions，It can guarantee its unique quality during the shelf life；Other than that，Mooncakes should not be used with other foods、Sundries are stored together。   Experts of this issue： Zhang Jiukui, Vice Chairman and Secretary-General of China Bakery and Confectionery Industry Association, Fan Yongxiang, Director of the Standards Office of the National Center for Food Safety Risk Assessment、Researcher Fan Zhihong, Associate Professor, College of Food Science and Nutritional Engineering, China Agricultural University from：General Directorate of Marketing

Certification file reporting requirements 1、 The State Administration for Market Regulation will pass the "Unified Reporting Platform for Certification and Accreditation Business" (http) at 12 noon on September 18://report.cnca.cn) Release the random selection of quality management system certification certificates in 2018。The relevant certification body should complete the certification file reporting from 12 o'clock on September 18 to 17 o'clock on the 21st。Escalation path：Management system and service certification - certification activity sample file report - file report。The "Certification File Reporting Operation Manual" can be downloaded in the "Unified Reporting Platform - Home Page - Common Download" module。 Two、 Certification file report content (1) Certification application documents (2) Contract review documents (3) Certification contract (4) Audit plan (5) Auditor competency evaluation documents (6) Sign-in form for the first and last meetings (7) Audit records (8) Audit report (9) Certification decision and certification certificate The above materials only need to upload the files of the preliminary review/recertification and the latest surveillance audit (if any).，There is no need to upload an audit dossier for the entire certification cycle。 Technical support consultation telephone：010-58116300。  

    6June 6th，Zhejiang Provincial Safety Supervision Bureau reported，2018At about 6:42 on June 5, 2019，Four workers of Ningbo Zhongmao Hangzhou Bay Thermal Power Co., Ltd. were buried while cleaning cinders，The buried people were rescued one after another and sent to the hospital for rescue，But in the end, after rescue efforts failed, 4 people died。 Through the CNCA query platform, it is learned that the management system certification of Zhejiang Lvsheng Environmental Protection Engineering Co., Ltd. in the current effective state includes environmental management system certification、Quality Management System Certification and China Occupational Health and Safety Management System Certification。Certification risks are everywhere，Don't forget the original intention, you have to always!

Guide：A lot of businesses are in the process of dealing with things，Problems are often attributed to the lack of execution of employees。They want every employee to be as dedicated as Rowan in "Send the Letter to Garcia."。As everyone knows，The execution of a team or even an enterprise does not depend on personal dedication! One、Don't expect and rely on the person who "sent the letter to Garcia" The convenience of online information query and the popularity of handheld devices，Bringing reading into the age of fragmentation，This results in a large area of shallow reading and shallow thinking - people are becoming more and more accustomed to becoming half-informed "knowers"。MSMEs lack competitiveness，Individuals grow slowly in the workplace，All stem from a lack of systems thinking and the search for principles，It is the inevitable result of quick success。 Because of this，People are reluctant to "delve" into something more essential，I like books that only need to memorize a sentence or two after reading them, or superficial chicken soup on the Internet。 On such a premise，Most managers have also become simpler in their thinking – they are more inclined to ignore the process，As long as it turns out。thereupon，Asking employees for "execution" has become the only way for many business owners and managers to manage their subordinates - the enterprise has problems，It is the lack of "execution" of employees。 thereupon，"Send a Letter to Garcia" was wildly reprinted as a model of execution，It seems that the medicine for the development of the enterprise is that the employees have become Luo Wen, and there are no conditions、People who complete tasks without compromise。 As everyone knows，Rowan is not a man to be picked at random — someone told the president："There was a man named Rowan，There is a way to find Garcia，Only he can find it。- Everyone liked the latter result，But they all ignored this sentence intentionally or unintentionally。 First of all，This person was recommended by someone，His comprehensive ability has been tested and recognized。I believe，If you pick a random soldier from the troops，Even if he has a strong will to accomplish the task，I'm afraid it won't be enough to achieve my goal。 secondly，Rowan in his search for Garcia，Received a lot of information support，It's not like you're on the road alone without a clue。 And for small and medium-sized enterprises，We have just overlooked two of the most important points。 first，It's hard to find that kind of talent；second，We don't give our employees enough guidance。 I also admit that "send the letter to Garcia" is the highest level of execution，But as a small and medium-sized enterprise，Don't expect and rely on the people who "send the letter to Garcia" – we need to make it possible for ordinary people to do the basic tasks of the business。 Two、The fundamental guarantee of execution lies in the top-level design，Even the world's top 500 companies，In addition to the high level of knowledge of high-end talents，The source of grassroots employees is not much different from that of ordinary small and medium-sized enterprises。 The execution of these enterprises is strong，It's not that they're poaching all the best talent from the grassroots — a lot of them are from Fortune 500 companies，In small businesses, there is still not always the ability to execute。 This gave me a new understanding of execution – the essence of execution is not personal，It's about the norms of the enterprise。 We won't go into the theory，A few examples are enough： 1、Walmart's "Three-Meter Smile Principle" and "Customer First Principle" study the principles of interpersonal relationships and communication，We know：The most important need of human nature is to be respected and affirmed。therefore，Smiling and not dismissing customer objections has become Walmart's customer first principle。 The service industry is relevant and important – in a sense，Whether or not a customer feels comfortable with an employee is itself an integral part of paying the bill。A lot of bosses like to talk，Should be polite to customers，However, everyone's tutoring and future growth education environment is different，The sense of politeness is also different，A lot of people just like to be cold-eyed，Arguing with people。 therefore，It's useless for you to tell you how to do it，So Walmart institutionalized it： First of all，When approaching a customer within 3 meters，It's important to keep smiling – everyone has a different standard of laughter，All right，Uniform standards，8 teeth exposed。 secondly，Encounter customer dissatisfaction，Ordinary employees may have deviations in the interpretation process，That's one size fits all – the customer is always right。What's really wrong，There are more communicative managers to solve。 I didn't know much about Walmart's "customer first" principles，I thought it was just a pediatric preaching，Only now do we understand the subtlety of its institutional design。 2、Toyota's "Five Questions" Management and Continuous Improvement Once，Naiichi Ohno, the former vice president of Toyota Motor Corporation, noticed that the machines on a production line were always stalling，The reason is all because the fuse is blown out。Replace the fuse in a timely manner every time though，But it won't be long before it burns out again，It seriously affects the efficiency of the entire production line，Other words，Replacing the fuse did not solve the underlying problem，thereupon，Naiichi Ohno had the following Q&A with the workers： One asked："Why did the machine stop?" answer："Because the load is exceeded，The fuse broke。"Two questions："Why overload?" answer："Because the bearings are not lubricated enough。Three questions："Why isn't there enough lubrication?" answer："Because the lubrication pump can't absorb the oil。Four questions："Why can't you absorb oil?" answer："Because the oil pump shaft is worn、Loosened。Five questions："Why is it worn?" Again："Because there are no filters installed，Impurities such as iron filings were mixed in。After five consecutive times of asking "why"，to find the real cause of the problem and the solution to it，Install the filter on the oil pump shaft。 If we don't have this spirit of going to the root to uncover the problem，It will be the same as ever，It's just a hasty change of fuse，The real problem is still not solved。 5 Whys，Also known as the "Five Questions Method"，It is a method of identifying the root cause of the occurrence of a problem by asking questions continuously。 This approach was originally proposed by Sakichi Toyoda，His son, Kiichiro Toyoda, was the founder of Toyota，therefore，The "Five Questions" later became one of the important principles of Toyota's success，It has been called "the foundation of Toyota's scientific method" – even when grassroots employees encounter problems，You must also fill out the "Five Questions" form，Each layer of questions should be answered accordingly，And get to the root of the problem。presently，This approach has been widely adopted outside of Toyota，including in continuous improvement、It is also often used in Lean Manufacturing and Six Sigma。 In fact，The "Five Whys" are not a new invention，in everyday life，We often hear people say, "There's a problem，Ask a few more whys"，There is also an old Chinese proverb："Break the casserole and ask the end"，That's what happened。 visible，Management doesn't have to be esoteric，Just recall，We grew up，I have learned a lot of management principles early on，But we just turn a blind eye，It's a mouthful，But it is rarely investigated。The more "familiar it is" how and how things are said，The worse we do, the worse we do，Can't do it。For example, "Know yourself and know your enemy."，Win all battles"，For example, "you can imagine"，For example, "Knowing is determined."，Peaceful"，For example, "comparing hearts to hearts"，For example, "Do what you don't want to do."，Do not do unto others" - this "compare the heart with the heart" and "do not want to be done to yourself."，Don't do unto others" is not what we often say in management, "empathy"? Management is sometimes about magnifying seemingly inconspicuous experiences，Duplicate applications，Make it a work habit for us。 Three、The key to execution is not "should"，Rather, "must" is limited to space，There are many similar cases in the world's top 500 companies，Seemingly unremarkable，It just turns the "how it should be" that we often say in our lives into an institutionalized "how it must be"，It is the achievement of their strong execution。 therefore，The key to execution is not to tell employees "should"。If what should be done is of great significance to the survival and development of the enterprise，Then say "must"，And institutionalize them。You can't blindly expect results，It is necessary to make clear the results of guarantees。 Execution in management can't rely too much on one person - good to do well，Not good is not done well；Consciously do a good job，Unconsciously not doing well。 Four、Execution is designed Execution is not an empty slogan，It's not about relying on good employees，It's not an extravagant expectation that everyone will be spontaneous，It's by the system、A sound system - top-level design。 Execution is designed，There is a principle in executive design。Execution is cultivated，The cultivation of executive power is to explain the truth clearly。 Execution is checked out。There should be a checklist for the inspection of execution。 Strategy determines success or failure depending on the foresight of senior decision-makers，Details determine success or failure depends on the execution of the middle and grassroots levels。However, the foundation of execution lies in the top-level design ability of high-level decision-makers。The point is not how to imitate the system of famous companies in one fell swoop，It's about understanding what principles or principles they are based on to design these systems，So as to really inspire us how to build execution through system design。 Good top-level design，It's all about reducing trial and error among employees、err。 — THE END — This article originated from IATF16949，If there is any impact or inconvenience，Please contact us，We will retract this article as soon as possible。